Products > Fiber Coupled > Pearl™ Modules
PEARL™ MEDICAL SERIES (ALPHA RELEASE)
The Pearl™ Medical Series is optimized to meet the demanding requirements of consistent unit-to-unit performance with ease of integration. Standard features include a pilot beam, monitor photodiode and feedback tolerant design.
nLIGHT’s proprietary single-emitter integration technology enables industry-leading efficiency and reliability, thus minimizing system footprint and maximizing doctor up-time.
The Pearl™ uses a revolutionary fiber technology, PowerCore™, which eliminates mode sensitivity to fiber motion, which optimizes consistency of light on skin performance.
- Patented nXLT™ diode protection for extended life
- Low-current, fault-tolerant architecture
- Industry-leading wall-plug efficiency
- PowerCore™ mode-stable fiber
- Plug and play compatibility with OptoTools™ DL system
- Electrically isolated housing
- Acne Treatment
- BPH
- Dental
- Eye Surgery
- Hair Removal
- Leg Vein Treatment
- Surgical
|
| | P10 | | Optical | | Wavelength | nm | 810 | 980 | 1470/1530 | 1700 | 1908/1940 | | Wavelength tolerance | nm | 10 | 10 | 20 | 20 | 20 | | CW output power5 | W | 25 | 30 | 20 | 12 | 8 | | Fiber core diameter | µm | 400 | 200/400 | 200/400 | 200/400 | 200/400 | | Beam divergence | NA1 | 0.22 | 0.22 | 0.22 | 0.22 | 0.22 | | Spectral width (FWHM) | nm | 5 | 10 | 15 | 15 | 20 | | Slope efficiency5 | W / A | 5.5 | 5.5 | 4.0 | 2.5 | 1.5 | | Electrical | | Power conversion efficiency5 | % | 50 | 58 | 35 | 17 | 10 | | Threshold current | A | 1.0 | 0.4 | 0.8 | 1.4 | 0.9 | | Operating current5 | A | 5.5 | 6.1 | 5.7 | 6.6 | 7.5 | | Operating voltage | V | 9.0 | 8.3 | 11.1 | 11 | 10 | | Series resistance | Ω | 0.1 | 0.2 | 0.3 | 0.3 | 0.5 | | Pilot Beam | mW | <1 | | Mechanical | | Storage temperature range2 | °C | -30 to +60 | | Mass | gr | 100 | 100 | 220 | 220 | 220 | | Thermal | | Thermal resistance3 | °C / W | 0.5 | 0.8 | 0.6 | 0.6 | 0.8 | | Operating temperature | °C | +15 to +35 | | Wavelength temperature coefficient4 | nm / °C | 0.28 | 0.35 | 0.55 | 0.6 | 0.7 | | | P16 | | Optical | | Wavelength | nm | 810 | 980 | 1470/1530 | 1700 | 1908/1940 | | Wavelength tolerance | nm | 10 | 10 | 20 | 20 | 20 | | CW output power5 | W | 35 | 50 | 35 | 20 | 13 | | Fiber core diameter | µm | 400 | 200/400 | 200/400 | 200/400 | 200/400 | | Beam divergence | NA1 | 0.22 | 0.22 | 0.22 | 0.22 | 0.22 | | Spectral width (FWHM) | nm | 5 | 5 | 15 | 15 | 20 | | Slope efficiency5 | W / A | 8.5 | 8.5 | 7.0 | 4.0 | 2.0 | | Electrical | | Power conversion efficiency5 | % | 50 | 58 | 35 | 17 | 10 | | Threshold current | A | 1.0 | 0.4 | 0.8 | 1.4 | 0.9 | | Operating current5 | A | 5.0 | 6.3 | 6.0 | 6.8 | 7.7 | | Operating voltage | V | 14.5 | 13.2 | 18.5 | 17.6 | 16 | | Series resistance | Ω | 0.2 | 0.3 | 0.5 | 0.5 | 0.9 | | Pilot Beam | mW | <1 | | Mechanical | | Storage temperature range2 | °C | -30 to +60 | | Mass | gr | 180 | 180 | 350 | 350 | 350 | | Thermal | | Thermal resistance3 | °C / W | 0.3 | 0.5 | 0.3 | 0.3 | 0.5 | | Operating temperature | °C | +15 to +35 | | Wavelength temperature coefficient4 | nm / °C | 0.28 | 0.35 | 0.55 | 0.6 | 0.7 | | Accessories | | PPS™ OEM Diode Driver | | DL System with DiodeSafe™ | | Monitor Photo Diode | 1 Numerical aperture (NA) is the sine of the half-angle encircling 90% of the optical energy from the fiber.
2 A non-condensing environment is required for storage and operation.
3 Thermal resistance is the diode junction temperature shift per incremental Watt of heat load.
4 The wavelength temperature coefficient is the wavelength shift per °C change at the diode junction.
5 If Pearl operated with an aiming beam these specification will be altered (consult factory for details)  |
 Download datasheet
|
RELATED PRESS RELEASES
ALL PRODUCTS
|
